How to clean the panel of an infrared cookers?

Before cleaning: When cleaning the infrared cookers, the main power supply must be unplugged first. To prevent accidents, please make sure the surface has cooled down before cleaning. As a type of electrical product, it is strictly prohibited to clean the product while it is plugged in, otherwise it is easy to cause electric shock. If you don't wait for the infrared cookers to cool down before cleaning the product, you are likely to get burned. Therefore, for your personal safety, it is best to operate and execute strictly in accordance with this requirement.

2. During cleaning: Avoid using disinfectants, gasoline, acids or other corrosive cleaning agents; Do not use cleaning agents with abrasive particles, steel wire friction, etc., to avoid scratching the surface and causing damage to the stove body and cookware. For general stains, you can wipe them off with a damp cloth containing hot soda water. The cloth used for wiping should be a soft one to avoid scratching the surface. If the dirt on the surface is quite severe, please wait for the infrared cookers to cool down and unplug the power supply. Then, use a special scraper for infrared cookers (a thin sheet can be used as a substitute) to remove the dirt on the surface. After that, apply toothpaste (with an appropriate amount of water) or alcohol, and wipe it with a cloth, scouring pad or cleaning brush.

3. After cleaning: The residue of the detergent (soft cleaner) should be removed with cold water and dried with a dry cloth to avoid water coming into contact with the circuit and damaging the furnace body.

Cleaning and maintenance methods for infrared cookers

For slight dirt on the microcrystalline plate, control panel and the body, please wipe it with a soft damp cloth. For oil dirt, use a soft damp cloth dipped in a small amount of toothpaste or neutral detergent to wipe it, and then wipe it clean with a soft damp cloth. Do not use a hard brush to scrub the body when cleaning.

2. Dust on the surface of the intake and exhaust ports can be wiped off with a cotton swab. Oil stains can be carefully removed with a toothbrush and a little detergent that does not damage the casing.

3. Do not open the infrared cookers for cleaning.

After long-term use of the infrared cookers, some dust or other dirt may accumulate at the suction and exhaust ports. When cleaning, please wipe them with a soft dry cloth. A lot of mouth dust can be removed with a soft brush or a mini vacuum cleaner.

5. During the cleaning process of the infrared cookers, it is necessary to avoid using disinfectants, gasoline, acids or other corrosive cleaning agents to prevent damage to the stove body and cookware.

6. Always keep the entire furnace body clean. When not in use, wrap it in plastic bags and boxes to prevent cockroaches and other insects from entering the machine and causing malfunctions.